Zinc Coated Drive Pin Galvanized Concrete Steel Pin Shoot Nail

Short Description:

drive pins use good quality high carbon steel as raw mateiral which meets International strandard (AISI 1060-1065) to ensure the
products’ quality in high position.

Send email to us Download as PDF

Product Detail

DRIVE PIN
Material	high quality carbon steel
Head Diameter	7.6mm/.300"
Shank Diameter	3.7mm/.145"
Length	19mm,22mm,27mm
Surface	bright, galvanized ,zinc plated
Note:	1-Accessory:with 8mm dia. flute
	2-knurled shank available

Features:
1.Produced with high quality carbon steel.
2.The nails are widely used for home decoration,concrete or holding the aluminum alloy on the concrete.
3.Different size can meet different client requirement.
4.Use with gas nail gun or used in conjunction with the powder actuated tools.

Drive Pins With Steel Washer Metal Right Angle Ceiling Clip

MAIN POINTS
1. Special Steel Nailing depth: 20-30mm for concrete, 30-50mm for brick masonry, and 1-3.5mm for sheet steel

2. The steel nail shall be clamped with steel wire pliers for knocking, or the steel nail shall be nailed on the small wooden strip first, and then nailed into the collective. When the nail is caught by bare hands for knocking, the fingers shall be avoided to be damaged.

3. When special steel nails are knocked, the force shall be positive. When using a larger hammer, the knocking force shall be large and the number of knocks shall be as small as possible. The final hammering depth shall be deeper.

4. When nailing concrete with high grade (more than 200#), if possible, drill a hole with the depth of 1 / 5-1 / 3 of the depth of steel nailing.

5. Avoid flying of steel nails when knocking

Workable for all popular powder fastening systems and single pin Concrete Nailers.
Ballistic point and smooth shank makes the penetrating easier and lower defect rate.
Special treated pins are so tough they can penetrate dense concrete, masonry joint or structural quality steel. Plated surface makes the pins durable and suitable for treated lumber.
Pins measure 1-3". With a .300” Head diameter, .145” Shank diameter and .315” diameter flute.
1" Diameter Washer increases bearing surface against the material to be fastened. Particularly used for fastening wood to concrete, wood to steel, steel to concrete and steel to steel.

Packing of drive pin

packing1 : bulk packing, 25kg/ctn
packing2 : small packing: 1kg/small box, 25boxes/ctn
packing3 : small packing:1kg/plastic bag, 25bags/ctn
packing4 : at customers' special request on weight
packing5 : with or without pallet
Delivery Details : 3-30 days after order of nail

Previous: Stripe Nails Gas Nail Shooting Nails for Construction and Installment

Next: Hot Sale Electro and Hot Dipped Galvanized Steel Wire

Write your message here and send it to us