Small Fasteners, Big Advantages

drywall nail

 

WC1218-FT4-Fasteners-p1-table-1

 

Drywall hangers and finishers pride themselves on the details: sharp corners, effortless curves, seamless interior expanses. Top construction companies and drywall contractors understand that the little things make a big difference in their overall costs as they invest in quality fasteners and quality tools to ensure the job gets done faster, and with superior results.

While forecasts for the construction market are strong, the pressures for the construction industry segment are real. Finding enough labor to fulfill contracts is tough. You’re likely paying more to attract and keep your crews—let alone find experienced installers. And the price of gypsum and finishing products are leading the way in material cost increases.

Together, these economic realities add up to tighter margins that increase the temptation to scrimp on material costs. However, as top construction companies and drywall contractors understand, investing in the right fasteners and tools can impact job profitability.

This article explores three ways fasteners and tools alone affect profitability:

  • Less waste
  • Better productivity
  • Fewer unnecessary tasks and costs

Quality Fasteners Lead to Less Waste

It may seem easy to gravitate to the least expensive screws to help bring down a bid and win a job. But in reality, commodity fasteners may actually cost more in the end.

Consider fastener waste. Spinouts and fastener heads that pop off during installation seem to be an accepted part of hanging drywall. When you get a bad fastener, you toss it and put in a new one. The unit cost is very small but you’re tossing away profits little by little.

An issue is knowing why fasteners fail. A popped head is likely the result of uneven heat treatment during manufacturing. Conversely, fasteners that twist or bend during installation were not properly heat treated. Often, you’ll get both in the same box with commodity fasteners.

Why? It’s a matter of manufacturing cost and quality control. Screws require consistent heat treatment: too much heat and the metal becomes brittle; too little and its poorly head treated and soft. While industry standards specify temperature for heat treatment, commodity manufacturers cut costs by heat treating as many fasteners as possible in one batch. This results in uneven treatment throughout the batch and more screws that will fail.

Professional fastener manufacturers limit their batch size to ensure consistent heat treatment. Smaller batches during heat treatment means more consistent screws and fewer failures. And more usable screws means you’re getting the performance you need.

The dies and punches used in manufacturing reveal another quality difference. The longer a die or punch remains in service, the more it wears down. This results in dull screw threads, railroading, and loose driver recesses. Both of these factors significantly affect screw performance, a topic we’ll discuss next.

While box information does not generally include detailed manufacturing information, you can check a manufacturer’s website for production specifications

What you should look for:

  • Wire (Professional-grade fasteners are made with a superior-grade SAE 1022 wire)
  • Heat treatment loads (lower is better)
  • Head punch life (lower is better)
  • Thread die life (lower is better)
  • Industry standards certifications (ISO 9002, ISO 14001, ICC Evaluation Service Reports, adherence to ASTM and ASME standards)

The difference in fastener tip angle and sharpness are readily apparent. The professional screw features a super-sharp point, and the steep angle of the shaft allows the fastener to penetrate secure to wood and metal framing significantly faster. By touch, the screw threads are perceptibly sharper and cleaner than those on the commodity screw (see manufacturing comparisons in the previous section).

Less obvious are the differences in the screw head. The professional screw has a tighter recess which leads to better bit engagement, less wobbling, and fewer cam-outs. The double bugle head design reduces paper burrs as the head seats into drywall.

What you should look for:

  • Sharpness of fastener tip for faster penetration
  • Sharpness of fastener threads for faster and more secure penetration
  • Screw recess with tighter fit for fewer cam-outs
  • Double bugle head design to eliminate paper burrs

Post time: May-10-2021