Products

PVC Coated and Galvanized Square Welded Wire Mesh

Welded wire mesh typically has larger openings than woven wire mesh. With the wire strands welded at each intersection, welded wire mesh is more capable of maintaining its shape when stressed.

Square welded wire mesh is the commonly used welded wire mesh. Other hole types include rectangle type, special type and so on. In general, square welded wire mesh is made of galvanized steel wire, zinc-coated steel wire, low carbon steel wire, PVC coated welded wire mesh and vinyl coated steel wire.

square-welded-meshroll-hand                    square-welded-wire-greenroll

                      Heavy duty square welded wire mesh                                                                             Green PVC coated square welded wire mesh

square-welded-wire-roll                    square-welded-wire-panels

           Hot-dipped galvanized square welded wire mesh                                                           Galvanized square welded wire panels

Square welded wire mesh sizes

Low carbon electric-galvanized square welded wire mesh

  • 12.7 mm × 12.7 mm × 0.9 mm × 1000 mm × 30 m.
  • 25.4 mm × 12.7 mm × 0.9 mm × 1000 mm × 30 m.
  • 25.4 mm × 25.4 mm × 1.4 mm × 1000 mm × 30 m.
  • 50.8 mm × 25.4 mm × 1.6 mm × 1000 mm × 30 m.
  • 50.8 mm × 50.8 mm × 1.8 mm × 1000 mm × 30 m.
  • End application: for plastering.

Low carbon black square welded wire mesh

  • 12.7 mm × 12.7 mm × 0.9 mm × 1000 mm × 30 m.
  • 25.4 mm × 12.7 mm × 0.9 mm × 1000 mm × 30 m.
  • 25.4 mm × 25.4 mm × 1.4 mm × 1000 mm × 30 m.
  • 50.8 mm × 25.4 mm × 1.6 mm × 1000 mm × 30 m.
  • 50.8 mm × 50.8 mm × 1.8 mm × 1000 mm × 30 m.
  • End application: for plastering.

Low carbon hot-dipped galvanized square welded wire mesh

  • Size of opening: 12.50 mm × 12.50 mm;
  • Wire diameter: 0.50 mm;
  • Width of roll: 1275 mm.
  • Weight of 1 square m.: 0.240 kg.
  • End application: for producing armored glass.

Quality specifications:

  1. Allowable wire diameter tolerance: ± 0.02 mm.
  2. Allowable tolerance of size of opening: ± 0.50 mm.
  3. Allowable tolerance of width of roll: ± 10 mm.
  4. Low carbon heat-treated wire should be used for making wire mesh. Wire surface must be bright, without chaps, exfoliation, rolling marks and rust. The welded places must be fixedly welded.
  5. The wire mesh should not have detached wires.
  6. Weld should have breakout power no more than 49 N (5 kgF).
  7. Each roll of wire mesh should have length within 100-200 running meters. Allowed: 
    Single spills in quantity no more than 1% from the total quantity of openings per 1 sq.m. (in non-concentrated area). 
    No more than one completely detached wire per 50 running meters.

 

 


Post time: May-29-2019
WhatsApp Online Chat !